Steel Braid Hose and Fittings
AN Tube & PipeFittings
Easy way to reconize sizes of fittings and hose.
Put number size over 16 to get size range that you can recognize.
Example # 8 hose would be 8/16 or approx.1/2" in size
Allways use
lubricant on threads
AN # or - (dash) refers to hose or fitting or tube
size. AN uses 37° flares in fittings.
AN # Thread size ID
Wrench Size
-2 5/16-24
7/16
-3 3/8-24
.188
1/2
-4 7/16-20
.219
9/16
-5 1/2-20
.625
-6 9/16-18
.344
11/16
-8 3/4-16
.438
7/8
-10 7/8-14
.562
1
-12 1-1/16-12
.688
1-1/4
-16 1-5/16-12
.875
1-1/2
Steel Braid Hose cut to your length
Steel Braided Neopreme Rubber - Medium Pressure
Steel Braided Teflon - Hi Pressure
Hydraulic-Fuel-Oil-Water Lines
The Following Illistrutations will let you what is available to
you.
AN Flare Tube
Hose Ends for Steel Braid Rubber Hose
|
|
|
|
|
| Straight |
45°Forging |
90°Forging |
45°Bent Tube |
90°Bent Tube |
|
|
|
|
|
| 120°Bent Tube |
150°Bent Tube |
180°Bent Tube |
Banjo |
Clamp |
Flare Tube Adapters AN 37°
|
|
|
|
|
| tube to pipe |
tube to tube |
tube to tube |
#6 to Holley |
#8 to Holley |
|
|
|
|
|
| #6 Holley extended. |
Carb-Adapt. |
Small Holley |
Fuel Pumps |
Invert-Flare |
|
|
|
|
|
| T P I |
Fuel Injection |
AN
90° to Fuel Pump |
AN to Fuel Pump |
AN to
Air Hose |
|
|
|
|
|
AN to
Quick Disc |
Pressure Gage AN to Pipe |
Pressure Gage
M-F |
Tube T
Pipe on side |
TubeT- Brkt.
Pipe on Side |
Pipe to Flare Tube Adapters
|
|
|
|
|
Straight F-M
Pressure Gage |
90° F-M
Pressure Gage |
90° Long M-M
Pressure Gage |
45° Tube
to Pipe |
90° Tube
to Pipe |
|
|
|
|
|
Tube to Pipe
T on run |
Tube to Pipe
T |
F tube to
Pipe |
45° Tube
M - F |
90° Tube
M - F |
|
|
|
|
|
90° Tube
F-F Forging |
90° Tube
F-F Bent Tube |
45° Tube
F-F BentTube |
Straight Tube
F-F Swivel |
90°
Tube Union |
|
|
|
|
|
| Swivel T |
Swivel T
on run |
Tube T |
Tube T
Reducer on run |
Tube T
Reducer |
 |
|
|
 |
|
| Tube Cross |
Reducing Tube M - F |
Reducing
Tube Bushing |
Banjo
Dual Tube |
|
Bulkhead Tube Fittings
|
|
|
|
|
| Straight |
45° |
90° |
T |
T on run |
Nuts Sleeve
Plugs
|
|
|
|
|
| Bulkhead Nut |
Tube Nut |
Tube Sleeve |
Allen Pipe Plug |
Square Pipe Plug |
Tube Fittings
 |
|
|
|
|
| Tube Cap |
Tube Plug |
Tube Plug
O Ring |
|
|
Pipe & Misc. Fittings
|
|
|
|
 |
| Pipe Nipple |
Pipe Collar |
90° Pipe Coupler |
45° Pipe Coupler |
T |
|
|
|
|
|
Straight
Pipe to Hose |
45°
Pipe to Hose |
90°
Pipe to Hose |
Pipe
Bushing |
Y Block
1/8 pipe on top |
|
|
|
|
O
O |
Bulkhead
Ball Valve |
Filter |
Check Valve |
Cruch Seals |
AN O Rings |
|
|
|
|
|
Male - Steel
Weld Bung |
Male - Alm.
Weld Bung |
Female - Alm
Weld Bung |
|
|
Teflon Steel Braided Hose Ends
(High Pressure)
|
|
|
|
|
| Straingt |
45°Forging |
45° Bent Tube |
90° Forging |
90° Bent Tube |
|
|
|
|
|
| Female Inverted Flare |
Male
Inverted Flare |
Tube to Male
Inverted Flare |
Tube to Fem.
Inverted Flare |
|
|
|
|
|
|
Long Banjo
Hose End |
Long Banjo
Male Tube |
Banjo Strt.
Hose End |
Banjo 15°
Hose End |
Banjo Tube |
|
|
|
|
|
Dual Tube"
Banjo |
Single
Banjo Bolt |
Dual
Banjo Bolt |
Hose End
Olives |
Hose End
Assy. Tool |